Polyeco? NS thermoplastic polyolefin (TPO) waterproofing membrane

Scope of application

Scope of application: widely used in industrial and civil building roofing and underground space waterproof engineering, more suitable for waterproof layer above or outside with cover panel shade protection built-in single-layer roof.

Product specifications

Type Thickness(mm) Width(m) Length(m) Overlapping

H(均質(zhì))

L(帶纖維背襯)

P(織物內(nèi)增強(qiáng))

1.2、1.5

1.8

1、2 20 Welding
 

Product features

1.Reliable formula and technology, and ever-evolving performance;
2.Eco-friendly chlorine-free formula;
3.Diversified options of material for the structural layer, in a bid to cope with various installation methods adaptively, thereby saving time and costs;
4.Recyclable for high material utilization.

Technical indicators

Executive Standards:GB27789-2011《Thermoplastic Polyolefin (TPO) Waterproofing Membrane"

project index
H L P
The thickness of the resin layer on the intermediate tire base/mm ≥ - - 0.4

Tensile properties
Maximum tensile force/ (N/cm) ≥ - 200 250
Tensile strength/MPa ≥ 12.0 - -
Elongation at maximum tensile force/% ≥ - - 15
Elongation at break/% ≥ 500 250 -
Low temperature bending -40°C without cracks
Seam peel strength/ (N/mm) ≥ 4.0 or coil destruction 3.0
Right angle tear strength/ (N/mm) ≥ 60 - -
Artificial climate accelerates aging Time/hour 2500
appearance No blistering, cracks, delamination, bonding and holes
Maximum pull retention/% ≥ - 90 90
Tensile strength retention/% ≥ 90 - -
Elongation retention at maximum pull/% ≥ - - 90
Elongation at break retention/% ≥ 90 90 0
Low temperature bending -40°C without cracks

 

Construction steps

Mechanical fixation method:

base layer cleaning → laying air insulation layer → laying insulation board → pre-laying coil → fixed coil → lap treatment → node strengthening → self-inspection and acceptance

Full adhesion method: base layer cleaning → pre-laid coil → Large surface gluing → Laying coil → lap treatment → node strengthening → Closing treatment → Self-inspection and acceptance

Empty laying method: base layer cleaning → pre-laid coil → lap treatment → node reinforcement → self-inspection and receipt

Case show

Xiaohe International Convention and Exhibition Center

瀟河